+++ /dev/null
-2004-10-28 xfade configure,config/acx_libpq.m4
-Configure options should override the default searchpath.
-
-=================================
-
-2004-11-02 darcyb share/slon.conf-sample
-Include a sample documented slon config file, Thanks Ed L. for the initail work
-
-=================================
-
-2004-11-02 darcyb GNUmakefile.in,share/Makefile
-install the sample conf, when doing a make install
-
-=================================
-
-2004-11-08 cbbrowne src/backend/slony1_base.sql
-Added documentation on columns that were not previously documented
-
-=================================
-
-2004-11-10 cbbrowne src/backend/slony1_funcs.c,src/backend/slony1_funcs.sql
-Fixed typos, added further schema documentation to C functions
-
-=================================
-
-2004-11-10 cbbrowne src/backend/slony1_funcs.sql
-Add in "draft" version of RebuildListenEntries() that generates
-sl_listen entries automatically whenever sl_path and sl_subscribe
-change
-
-=================================
-
-2004-11-10 cbbrowne doc/adminguide/README,doc/adminguide/SlonyAddThings.txt,doc/adminguide/SlonyAdministrationScripts.txt,doc/adminguide/SlonyConcepts.txt,doc/adminguide/SlonyDDLChanges.txt,doc/adminguide/SlonyDefineCluster.txt,doc/adminguide/SlonyDefineSet.txt,doc/adminguide/SlonyDropThings.txt,doc/adminguide/SlonyFAQ.txt,doc/adminguide/SlonyFAQ01.txt,doc/adminguide/SlonyFAQ02.txt,doc/adminguide/SlonyFAQ03.txt,doc/adminguide/SlonyFAQ04.txt,doc/adminguide/SlonyFAQ05.txt,doc/adminguide/SlonyFAQ06.txt,doc/adminguide/SlonyFAQ07.txt,doc/adminguide/SlonyFAQ08.txt,doc/adminguide/SlonyFAQ09.txt,doc/adminguide/SlonyFAQ10.txt,doc/adminguide/SlonyFAQ11.txt,doc/adminguide/SlonyFAQ12.txt,doc/adminguide/SlonyFAQ13.txt,doc/adminguide/SlonyFAQ14.txt,doc/adminguide/SlonyFAQ15.txt,doc/adminguide/SlonyFAQ16.txt,doc/adminguide/SlonyFAQ17.txt,doc/adminguide/SlonyFAQ18.txt,doc/adminguide/SlonyHandlingFailover.txt,doc/adminguide/SlonyHelp.txt,doc/adminguide/SlonyHowtoFirstTry.txt,doc/adminguide/SlonyIAdministration.txt,doc/adminguide/SlonyInstallation.txt,doc/adminguide/SlonyIntroduction.txt,doc/adminguide/SlonyListenPaths.txt,doc/adminguide/SlonyListenerCosts.txt,doc/adminguide/SlonyMaintenance.txt,doc/adminguide/SlonyPrerequisites.txt,doc/adminguide/SlonyReshapingCluster.txt,doc/adminguide/SlonySlonConfiguration.txt,doc/adminguide/SlonySlonik.txt,doc/adminguide/SlonyStartSlons.txt
-Add in material from Slony-I wiki that will become an "Administration
-Guide."
-
-=================================
-
-2004-11-12 cbbrowne src/ducttape/test_1_pgbench,src/ducttape/test_2_pgbench,src/ducttape/test_3_pgbench,src/ducttape/test_4_pgbench,src/ducttape/test_5_pgbench
-Make "ducttape" scripts that use pgbench aware of varying GNU Make names
-
-=================================
-
-2004-11-12 cbbrowne src/backend/slony1_funcs.sql
-Add FUNCTION generate_sync_event () - to try to add SYNCs even if slon isn't running
-
-=================================
-
-2004-11-13 wieck src/backend/slony1_funcs.sql,src/ducttape/test_1_pgbench,src/ducttape/test_2_pgbench,src/slon/local_listen.c,src/slon/remote_worker.c,src/slon/runtime_config.c,src/slon/slon.c,src/slon/slon.h
-Here is a first full functional and activated rebuiltListenEntries().
-Any change to sl_node, sl_path and sl_subscribe causes slon to reload
-the listen configuration. The logic is slightly different from what
-was first discussed and probably not in its final state. But it passes
-various configurations without any need to restart slon.
-
-Jan
-
-=================================
-
-2004-11-18 cbbrowne src/ducttape/test_6_autolisten
-A gratuitously complex test case which generates 6 nodes, and
-uses rebuildlistenentries() to generate the listen network
-
-=================================
-
-2004-11-19 cbbrowne doc/howto/slony-I-basic-mstr-slv.txt
-Basic tutorial now allows having Slony-I nodes on separate hosts
-
-=================================
-
-2004-11-19 cbbrowne tools/altperl/create_set.pl,tools/altperl/init_cluster.pl
-These scripts were at one point generating multiple slonik
-scripts to set up clusters/sets.
-
-As they only generate a single script, they now do so via one
-opening of files, and don't bother having multiple preambles
-
-=================================
-
-2004-11-19 cbbrowne src/backend/slony1_base.sql,src/backend/slony1_funcs.c,src/backend/slony1_funcs.sql
-Comments for sl_setsync, revisions to generate_sync_event(), new table maintenance function, add_missing_table_field(), textual and comment changes
-
-=================================
-
-2004-11-23 cbbrowne tools/altperl/reset_cluster.pl
-The "reset_cluster.pl" script is broken and should become unnecessary
-in 1.1...
-
-=================================
-
-2004-11-25 darcyb src/backend/slony1_funcs.sql
-Make cbbrowne's functions work as conceptualy intended
-
-=================================
-
-2004-11-25 cbbrowne src/ducttape/test_1_pgbench,src/ducttape/test_2_pgbench,src/ducttape/test_3_pgbench,src/ducttape/test_4_pgbench,src/ducttape/test_5_pgbench
-sh portability change - Use [ -z $WHATEVER ] ; rather than [[ $WHATEVER == "" ]];
-
-=================================
-
-2004-11-25 cbbrowne tools/generate_syncs.sh
-branches: 1.1.2;
-Add in "generate_syncs.sh" script to use the new "generate_sync_event()" procedure that can generate SYNCs even if the origin's slon is down.
-
-=================================
-
-2004-11-25 darcyb src/backend/slony1_funcs.sql
-supply missing arg to function comment, make function parse properly
-
-=================================
-
-2004-11-25 darcyb src/backend/slony1_funcs.sql
-Add a missing ' to correct parse error
-
-=================================
-
-2004-11-26 darcyb src/slon/conf-file.sample
-Duplicate file, share/slon.conf-sample is the correct home for this
-
-=================================
-
-2004-11-29 darcyb src/slon/confoptions.c,src/slon/confoptions.h
-Make it possible to easly obtain the value of a conf option
-
-=================================
-
-2004-12-01 darcyb src/slon/Makefile
-clean should yank the corefile too
-
-=================================
-
-2004-12-01 wieck src/backend/slony1_base.sql,src/backend/slony1_funcs.sql,src/ducttape/test_1_update_functions,src/slonik/slonik.c
-Added new function upgradeSchema(old_version). Slonik now determines
-the currently loaded slony1_funcs.sql version by calling slonyVersion()
-before updating the functions. It then calls upgradeSchema(old_version)
-so that this function can perform all the required modifications to the
-slony1_base schema depending on the old version.
-
-Jan
-
-=================================
-
-2004-12-02 wieck src/backend/slony1_funcs.sql,src/slon/remote_worker.c,src/slonik/parser.y,src/slonik/scan.l,src/slonik/slonik.c,src/slonik/slonik.h
-Added option "spoolnode = yes/no" to "store node" command.
-If spoolnode=yes is specified, the sl_node entry will have
-no_spool=true and slonik does not attempt to initialize a
-database for it.
-
-Jan
-
-=================================
-
-2004-12-02 cbbrowne README
-Changes reflecting the build changes in 1.1
-
-=================================
-
-2004-12-02 cbbrowne doc/howto/slonik_commands.html
-Minor rewordings
-
-=================================
-
-2004-12-02 wieck src/backend/slony1_funcs.sql,src/slonik/slonik.c
-Changed so that subscribeSet() is called on the data provider
-instead of the receiver. It should finally be called on the
-set origin and replace ENABLE SUBSCRIPTION entirely, but that
-is a way bigger change. With what we have so far it is possible
-to create and subscribe a virtual spool node.
-
-Jan
-
-=================================
-
-2004-12-02 cbbrowne tools/altperl/move_set.pl
-Remove unnecessary UNLOCK SET from move set script
-
-=================================
-
-2004-12-02 cbbrowne src/slon/README
-Added overview of what the components of slon do
-
-=================================
-
-2004-12-02 wieck doc/howto/slonik_commands.html
-Added spoolnode option to slonik command doc.
-
-Jan
-
-=================================
-
-2004-12-03 wieck src/slonik/slonik.c
-Create confirm records for all old events when slonik creates
-a spool node.
-
-Jan
-
-=================================
-
-2004-12-04 cbbrowne tools/altperl/slon-tools.pm,tools/altperl/slon_watchdog2.pl
-Added in node_is_subscribing() function to make watchdog less aggressive about restarting slon nodes
-
-If a node is in the process of being subscribed, then you can get
-long-running COPY requests that run for hours (this happens if it's a
-very large database).
-
-slon_watchdog2.pl therefore has two criteria to use to "throttle" its
-slon; thus if there has not been a local event on the node in the
-interval $killafter, then it will kill (and ultimately restart) the slon
-UNLESS a subscription is in progress.
-
-=================================
-
-2004-12-06 cbbrowne doc/adminguide/Makefile,doc/adminguide/addthings.sgml,doc/adminguide/adminscripts.sgml,doc/adminguide/cluster.sgml,doc/adminguide/concepts.sgml,doc/adminguide/ddlchanges.sgml,doc/adminguide/defineset.sgml,doc/adminguide/dropthings.sgml,doc/adminguide/failover.sgml,doc/adminguide/filelist.sgml,doc/adminguide/firstdb.sgml,doc/adminguide/help.sgml,doc/adminguide/installation.sgml,doc/adminguide/intro.sgml,doc/adminguide/legal.sgml,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/prerequisites.sgml,doc/adminguide/reshape.sgml,doc/adminguide/slonconfig.sgml,doc/adminguide/slonik.sgml,doc/adminguide/slony.sgml,doc/adminguide/startslons.sgml,doc/adminguide/stylesheet-hh.xsl,doc/adminguide/stylesheet.css,doc/adminguide/stylesheet.dsl,doc/adminguide/stylesheet.xsl,doc/adminguide/subscribenodes.sgml
-Transformed all Wiki material aside from the FAQ into DocBook SGML
-
-=================================
-
-2004-12-07 darcyb config/acx_pthread.m4
-Prefer -lpthread to -pthread on systems that support it (FreeBSD 5.X and newer)
-
-=================================
-
-2004-12-07 darcyb aclocal.m4,configure,configure.ac,config/docbook.m4,config/docs.m4
-add docbook tools to configure, add tools to build the concept docs (and friends) to configure as well
-
-=================================
-
-2004-12-07 darcyb Makefile.global.in,configure.ac,config/docbook.m4
-Make cbb's docbook stuff fit into our build env
-
-=================================
-
-2004-12-10 cbbrowne doc/howto/slonik_commands.html
-Fix to table of contents - SET MOVE (TABLE|SEQUENCE) was indexed as SET DROP
-
-=================================
-
-2004-12-10 cbbrowne doc/adminguide/faq.sgml
-Add in FAQ to the admin guide
-
-=================================
-
-2004-12-10 darcyb Makefile.global.in,configure,config/acx_pthread.m4,src/slon/Makefile
-Cleanup linking not done messages when compiling on FreeBSD 5 and 6
-
-=================================
-
-2004-12-10 cbbrowne tools/altperl/slon-tools.pm,tools/altperl/slon_watchdog2.pl
-Made watchdog2 smarter
-
-Instead of just "thumping" a slon once the latest _originating_ events
-get pretty old, it now bases the decision on the time of the latest
-_confirmation_ of an event from the provider...
-
-=================================
-
-2004-12-10 cbbrowne doc/adminguide/Makefile,doc/adminguide/SlonyAddThings.txt,doc/adminguide/SlonyAdministrationScripts.txt,doc/adminguide/SlonyConcepts.txt,doc/adminguide/SlonyDDLChanges.txt,doc/adminguide/SlonyDefineCluster.txt,doc/adminguide/SlonyDefineSet.txt,doc/adminguide/SlonyDropThings.txt,doc/adminguide/SlonyFAQ.txt,doc/adminguide/SlonyFAQ01.txt,doc/adminguide/SlonyFAQ02.txt,doc/adminguide/SlonyFAQ03.txt,doc/adminguide/SlonyFAQ04.txt,doc/adminguide/SlonyFAQ05.txt,doc/adminguide/SlonyFAQ06.txt,doc/adminguide/SlonyFAQ07.txt,doc/adminguide/SlonyFAQ08.txt,doc/adminguide/SlonyFAQ09.txt,doc/adminguide/SlonyFAQ10.txt,doc/adminguide/SlonyFAQ11.txt,doc/adminguide/SlonyFAQ12.txt,doc/adminguide/SlonyFAQ13.txt,doc/adminguide/SlonyFAQ14.txt,doc/adminguide/SlonyFAQ15.txt,doc/adminguide/SlonyFAQ16.txt,doc/adminguide/SlonyFAQ17.txt,doc/adminguide/SlonyFAQ18.txt,doc/adminguide/SlonyHandlingFailover.txt,doc/adminguide/SlonyHelp.txt,doc/adminguide/SlonyHowtoFirstTry.txt,doc/adminguide/SlonyIAdministration.txt,doc/adminguide/SlonyInstallation.txt,doc/adminguide/SlonyIntroduction.txt,doc/adminguide/SlonyListenPaths.txt,doc/adminguide/SlonyListenerCosts.txt,doc/adminguide/SlonyMaintenance.txt,doc/adminguide/SlonyPrerequisites.txt,doc/adminguide/SlonyReshapingCluster.txt,doc/adminguide/SlonySlonConfiguration.txt,doc/adminguide/SlonySlonik.txt,doc/adminguide/SlonyStartSlons.txt,doc/adminguide/addthings.html,doc/adminguide/addthings.sgml,doc/adminguide/adminscripts.sgml,doc/adminguide/altperl.html,doc/adminguide/cluster.html,doc/adminguide/cluster.sgml,doc/adminguide/concepts.html,doc/adminguide/concepts.sgml,doc/adminguide/ddlchanges.html,doc/adminguide/ddlchanges.sgml,doc/adminguide/defineset.sgml,doc/adminguide/dropthings.html,doc/adminguide/dropthings.sgml,doc/adminguide/failover.html,doc/adminguide/failover.sgml,doc/adminguide/faq.html,doc/adminguide/filelist.sgml,doc/adminguide/firstdb.html,doc/adminguide/firstdb.sgml,doc/adminguide/help.html,doc/adminguide/help.sgml,doc/adminguide/installation.html,doc/adminguide/installation.sgml,doc/adminguide/intro.sgml,doc/adminguide/legal.sgml,doc/adminguide/listenpaths.html,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.html,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.html,doc/adminguide/monitoring.sgml,doc/adminguide/mysheet.dsl,doc/adminguide/prerequisites.sgml,doc/adminguide/requirements.html,doc/adminguide/reshape.html,doc/adminguide/reshape.sgml,doc/adminguide/slonconfig.html,doc/adminguide/slonconfig.sgml,doc/adminguide/slonik.html,doc/adminguide/slonik.sgml,doc/adminguide/slonstart.html,doc/adminguide/slony.html,doc/adminguide/slony.sgml,doc/adminguide/startslons.sgml,doc/adminguide/subscribenodes.html,doc/adminguide/subscribenodes.sgml,doc/adminguide/t24.html,doc/adminguide/x267.html,doc/adminguide/x931.html
-Wiki data transformed to DocBook/SGML
-
-=================================
-
-2004-12-10 cbbrowne doc/adminguide/adminscripts.sgml,doc/adminguide/cluster.sgml,doc/adminguide/concepts.sgml,doc/adminguide/defineset.sgml,doc/adminguide/dropthings.sgml,doc/adminguide/failover.sgml,doc/adminguide/firstdb.sgml,doc/adminguide/help.sgml,doc/adminguide/installation.sgml,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/reshape.sgml,doc/adminguide/slonconfig.sgml,doc/adminguide/subscribenodes.sgml
-Fix up formatting of inclusions in documentation set
-
-=================================
-
-2004-12-10 darcyb src/slon/confoptions.c
-
-Fix cast to pointer from integer of different size on 64bit platforms
-
-=================================
-
-2004-12-10 darcyb src/slon/conf-file.h,src/slon/slon.h
-Remove warning of ProcessConfigFile not defined.
-
-=================================
-
-2004-12-11 darcyb src/slon/Makefile,src/slonik/Makefile
-Clean up maintainer-clean to remove the generated yacc/lex output
-
-=================================
-
-2004-12-11 darcyb src/slon/Makefile
-Remove a not yet commited thread from building
-
-=================================
-
-2004-12-11 darcyb doc/Makefile
-Build documentation
-
-=================================
-
-2004-12-13 darcyb src/backend/slony1_funcs.sql
-Fix patch/diff's braindead off by 2 lines error
-
-=================================
-
-2004-12-13 darcyb Makefile,aclocal.m4,configure,configure.ac,config/compiler.m4,config/general.m4
-Some more minor cleanups in the build environment, make building with debuging symbols optional
-
-=================================
-
-2004-12-13 cbbrowne doc/adminguide/addthings.html,doc/adminguide/bookindex.sgml,doc/adminguide/cluster.html,doc/adminguide/concepts.html,doc/adminguide/ddlchanges.html,doc/adminguide/defineset.sgml,doc/adminguide/dropthings.html,doc/adminguide/failover.html,doc/adminguide/faq.html,doc/adminguide/faq.sgml,doc/adminguide/filelist.sgml,doc/adminguide/firstdb.html,doc/adminguide/firstdb.sgml,doc/adminguide/help.html,doc/adminguide/help.sgml,doc/adminguide/installation.html,doc/adminguide/listenpaths.html,doc/adminguide/maintenance.html,doc/adminguide/monitoring.html,doc/adminguide/reference.sgml,doc/adminguide/requirements.html,doc/adminguide/reshape.html,doc/adminguide/slon.sgml,doc/adminguide/slonconfig.sgml,doc/adminguide/slonik.html,doc/adminguide/slonik.sgml,doc/adminguide/slonik_ref.sgml,doc/adminguide/slonstart.html,doc/adminguide/slony.html,doc/adminguide/slony.sgml,doc/adminguide/subscribenodes.html
-Plenty of updates to documentation; consolidated in man pages for slon/slonik
-
-=================================
-
-2004-12-13 darcyb doc/howto/slonik_commands.html,src/backend/slony1_base.sql,src/backend/slony1_funcs.sql,src/slon/misc.c,src/slon/remote_worker.c,src/slon/slon.c,src/slonik/parser.y,src/slonik/scan.l,src/slonik/slonik.c,src/slonik/slonik.h
-Due to lots of SIC regarding the pg_dump safe patches, I'll commit them.
-
-New functionality allows you to REPAIR CONFIG() a node(s) after you have used pg_dump/restore on them.
-slonik has a new statement REPAIR CONFIG(), and a new event class has been created REPAIR_CONFIG.
-
-=================================
-
-2004-12-13 darcyb src/slon/confoptions.c,src/slon/confoptions.h,src/slon/slon.c
-Cleanup some more compiler warnings
-
-=================================
-
-2004-12-14 cbbrowne doc/adminguide/addthings.html,doc/adminguide/addthings.sgml,doc/adminguide/adminscripts.sgml,doc/adminguide/app-slon.html,doc/adminguide/app-slonik.html,doc/adminguide/cluster.html,doc/adminguide/cluster.sgml,doc/adminguide/concepts.html,doc/adminguide/concepts.sgml,doc/adminguide/ddlchanges.html,doc/adminguide/ddlchanges.sgml,doc/adminguide/defineset.sgml,doc/adminguide/definingsets.html,doc/adminguide/dropthings.html,doc/adminguide/dropthings.sgml,doc/adminguide/failover.html,doc/adminguide/failover.sgml,doc/adminguide/faq.html,doc/adminguide/faq.sgml,doc/adminguide/firstdb.html,doc/adminguide/firstdb.sgml,doc/adminguide/help.html,doc/adminguide/help.sgml,doc/adminguide/installation.html,doc/adminguide/installation.sgml,doc/adminguide/listenpaths.html,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.html,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.html,doc/adminguide/monitoring.sgml,doc/adminguide/prerequisites.sgml,doc/adminguide/requirements.html,doc/adminguide/reshape.html,doc/adminguide/reshape.sgml,doc/adminguide/slon.sgml,doc/adminguide/slonik.sgml,doc/adminguide/slonstart.html,doc/adminguide/slony-commands.html,doc/adminguide/slony.html,doc/adminguide/slonyadmin.html,doc/adminguide/slonyintro.html,doc/adminguide/startslons.sgml,doc/adminguide/subscribenodes.html,doc/adminguide/subscribenodes.sgml
-Enormous SGML cleanup/improvement
-
-=================================
-
-2004-12-15 cbbrowne doc/adminguide/adminscripts.sgml,doc/adminguide/faq.sgml,doc/adminguide/listenpaths.sgml
-Added in docs on new Perl script to generate SET LISTEN requests
-
-=================================
-
-2004-12-15 cbbrowne tools/altperl/regenerate-listens.pl
-regenerate-listens.pl - Perl script that generates Slonik "SET LISTEN" entries
-based on the contents of a running Slony-I cluster.
-
-Documentation to follow in the next CVS commit...
-
-=================================
-
-2004-12-16 cbbrowne doc/adminguide/addthings.sgml,doc/adminguide/adminscripts.sgml,doc/adminguide/cluster.sgml,doc/adminguide/concepts.sgml,doc/adminguide/ddlchanges.sgml,doc/adminguide/defineset.sgml,doc/adminguide/dropthings.sgml,doc/adminguide/failover.sgml,doc/adminguide/faq.sgml,doc/adminguide/filelist.sgml,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.sgml,doc/adminguide/reference.sgml,doc/adminguide/reshape.sgml,doc/adminguide/slonik_ref.sgml,doc/adminguide/startslons.sgml,doc/adminguide/subscribenodes.sgml
-Added full Slonik reference in DocBook form, along with a rich set of
-linkages to it in the other materials in the admin guide.
-
-=================================
-
-2004-12-17 darcyb configure
-make the features in the previous commit available
-
-=================================
-
-2004-12-17 darcyb src/backend/slony1_funcs.sql
-More diff crazyness repairs
-
-=================================
-
-2004-12-17 darcyb doc/adminguide/Makefile
-Add schemadoc building support
-
-=================================
-
-2004-12-17 darcyb aclocal.m4,configure.ac,config/docbook.m4,config/docs.m4
-More docbook fixes, detect the correct version of docbook (4.2)
-
-=================================
-
-2004-12-17 darcyb doc/adminguide/filelist.sgml,doc/adminguide/localxid.sql,doc/adminguide/schemadoc.xml,doc/adminguide/slony.sgml
-Add Internals section, this section has a references of all the tables/views and functions used internaly by slony-I. localxxid is a copy of that found in the how-to directory.
-
-=================================
-
-2004-12-17 darcyb Makefile.global.in,configure.ac,doc/Makefile,doc/adminguide/Makefile
-More build environment changes to better support cbrowne's docbook work.
-
-=================================
-
-2004-12-20 darcyb doc/adminguide/Makefile,doc/adminguide/slony.sgml
-collateindex is handled by ./configure no need to attempt to override it here
-
-=================================
-
-2004-12-20 darcyb doc/adminguide/SlonyAddThings.txt,doc/adminguide/SlonyAdministrationScripts.txt,doc/adminguide/SlonyConcepts.txt,doc/adminguide/SlonyDDLChanges.txt,doc/adminguide/SlonyDefineCluster.txt,doc/adminguide/SlonyDefineSet.txt,doc/adminguide/SlonyDropThings.txt,doc/adminguide/SlonyFAQ.txt,doc/adminguide/SlonyFAQ01.txt,doc/adminguide/SlonyFAQ02.txt,doc/adminguide/SlonyFAQ03.txt,doc/adminguide/SlonyFAQ04.txt,doc/adminguide/SlonyFAQ05.txt,doc/adminguide/SlonyFAQ06.txt,doc/adminguide/SlonyFAQ07.txt,doc/adminguide/SlonyFAQ08.txt,doc/adminguide/SlonyFAQ09.txt,doc/adminguide/SlonyFAQ10.txt,doc/adminguide/SlonyFAQ11.txt,doc/adminguide/SlonyFAQ12.txt,doc/adminguide/SlonyFAQ13.txt,doc/adminguide/SlonyFAQ14.txt,doc/adminguide/SlonyFAQ15.txt,doc/adminguide/SlonyFAQ16.txt,doc/adminguide/SlonyFAQ17.txt,doc/adminguide/SlonyFAQ18.txt,doc/adminguide/SlonyHandlingFailover.txt,doc/adminguide/SlonyHelp.txt,doc/adminguide/SlonyHowtoFirstTry.txt,doc/adminguide/SlonyIAdministration.txt,doc/adminguide/SlonyInstallation.txt,doc/adminguide/SlonyIntroduction.txt,doc/adminguide/SlonyListenPaths.txt,doc/adminguide/SlonyListenerCosts.txt,doc/adminguide/SlonyMaintenance.txt,doc/adminguide/SlonyPrerequisites.txt,doc/adminguide/SlonyReshapingCluster.txt,doc/adminguide/SlonySlonConfiguration.txt,doc/adminguide/SlonySlonik.txt,doc/adminguide/SlonyStartSlons.txt
-Time to box the text files up and move them to the attic
-
-=================================
-
-2004-12-21 cbbrowne doc/adminguide/slonik_ref.sgml
-Moved preamble material a bit to indicate that echo can't be used
-in the "preamble" of a Slonik script
-
-=================================
-
-2004-12-21 darcyb doc/adminguide/Makefile,doc/adminguide/filelist.sgml,doc/adminguide/stylesheet.css,doc/adminguide/stylesheet.dsl
-use the correct dsl when building docs
-
-=================================
-
-2004-12-21 darcyb doc/adminguide/Makefile,doc/adminguide/adminscripts.sgml,doc/adminguide/installation.sgml,doc/adminguide/intro.sgml,doc/adminguide/prerequisites.sgml,doc/adminguide/reference.sgml,doc/adminguide/schemadoc.xml,doc/adminguide/slonik_ref.sgml,doc/adminguide/slony.sgml
-Convert book to parts + chapters
-
-=================================
-
-2004-12-22 cbbrowne doc/adminguide/slonik_ref.sgml
-Put in proper <refpurpose> entries for each Slonik command
-
-=================================
-
-2004-12-22 cbbrowne doc/adminguide/slonik.sgml
-Point to internal Slonik command reference, not the GBorg web site
-
-=================================
-
-2004-12-22 darcyb doc/adminguide/Makefile,doc/adminguide/addthings.sgml,doc/adminguide/adminscripts.sgml,doc/adminguide/app-slon.html,doc/adminguide/app-slonik.html,doc/adminguide/bookindex.sgml,doc/adminguide/cluster.html,doc/adminguide/cluster.sgml,doc/adminguide/concepts.html,doc/adminguide/concepts.sgml,doc/adminguide/ddlchanges.sgml,doc/adminguide/defineset.sgml,doc/adminguide/definingsets.html,doc/adminguide/dropthings.sgml,doc/adminguide/failover.sgml,doc/adminguide/faq.html,doc/adminguide/faq.sgml,doc/adminguide/firstdb.sgml,doc/adminguide/help.sgml,doc/adminguide/installation.html,doc/adminguide/installation.sgml,doc/adminguide/intro.sgml,doc/adminguide/legal.sgml,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/prerequisites.sgml,doc/adminguide/reference.sgml,doc/adminguide/requirements.html,doc/adminguide/reshape.sgml,doc/adminguide/schemadoc.xml,doc/adminguide/slon.sgml,doc/adminguide/slonik.sgml,doc/adminguide/slonik_ref.sgml,doc/adminguide/slony.sgml,doc/adminguide/slonyadmin.html,doc/adminguide/slonyintro.html,doc/adminguide/startslons.sgml,doc/adminguide/subscribenodes.sgml
-Building of schemadoc.xml now removes the local schema name, (allow for better portability between developers), update the embeded references in faq to make use of this convention. add Id tages to all the sgml files.
-
-=================================
-
-2004-12-22 darcyb Makefile.global.in
-Carry the docbook stuff through to the frontend
-
-=================================
-
-2004-12-22 cbbrowne doc/adminguide/prerequisites.sgml
-SGML tagging fixes
-
-=================================
-
-2004-12-22 darcyb doc/adminguide/addthings.sgml,doc/adminguide/adminscripts.sgml,doc/adminguide/bookindex.sgml,doc/adminguide/cluster.sgml,doc/adminguide/concepts.sgml,doc/adminguide/ddlchanges.sgml,doc/adminguide/defineset.sgml,doc/adminguide/dropthings.sgml,doc/adminguide/failover.sgml,doc/adminguide/faq.sgml,doc/adminguide/firstdb.sgml,doc/adminguide/help.sgml,doc/adminguide/installation.sgml,doc/adminguide/intro.sgml,doc/adminguide/legal.sgml,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/prerequisites.sgml,doc/adminguide/reference.sgml,doc/adminguide/reshape.sgml,doc/adminguide/slon.sgml,doc/adminguide/slonik.sgml,doc/adminguide/slonik_ref.sgml,doc/adminguide/slony.sgml,doc/adminguide/startslons.sgml,doc/adminguide/subscribenodes.sgml
-Validate using make check
-
-=================================
-
-2004-12-22 darcyb configure
-More docbook tweeks
-
-=================================
-
-2004-12-22 cbbrowne doc/adminguide/faq.sgml
-Added commentary on what happens to triggers and rules
-
-=================================
-
-2004-12-22 cbbrowne doc/adminguide/monitoring.sgml
-Built a variablelist to list different threads that generate log messages
-
-=================================
-
-2004-12-22 cbbrowne doc/adminguide/adminscripts.sgml
-Regrouped sections; doesn't need to be split into a bunch of pages...
-
-=================================
-
-2005-01-03 wieck configure
-new configure script based on last acx_pthread.m4 change.
-
-Jan
-
-=================================
-
-2005-01-03 wieck tools/Makefile,tools/slony1_extract_schema.sh
-Added script to extract the user schema (without slony cruft)
-from an existing node. The node must be the origin.
-
-Jan
-
-=================================
-
-2005-01-03 wieck config/acx_pthread.m4
-Don't know why actually using the pthread ld flags was commented out,
-but I suppose it would break more platforms than just FreeBSD 4.9.
-
-Jan
-
-=================================
-
-2005-01-04 cbbrowne tools/altperl/slon_start.pl
-Add in startup script changes from Steve Simms...
-
-- Support long option names
-- Optionally don't start a watchdog
-- Optionally specify where slon.env is
-- Nodes can be specified in either the form "node123" or "123"
-
-=================================
-
-2005-01-04 cbbrowne tools/altperl/slon-tools.pm
-Add in support for SSL connections
-
-Thanks to Steve Simms <steve@deefs.net>
-
-=================================
-
-2005-01-07 cbbrowne doc/adminguide/maintenance.sgml,tools/log.pm,tools/run_rep_tests.sh,tools/test_slony_replication.pl
-Added Perl/Bash scripts for testing how Slony-I replication is running.
-
-Also added documentation on these scripts to the Admin guide.
-
-=================================
-
-2005-01-10 cbbrowne tools/altperl/drop_set.pl
-Add Steve Simms usage, allow nodes to be 123 rather than node123
-
-=================================
-
-2005-01-10 cbbrowne tools/altperl/init_cluster.pl
-Changes from Steve Simms to "init_cluster.pl"
- - Allow location of tool config to be specified in the environment
- - Have output that shouldn't go to Slonik be #commented out
-
-=================================
-
-2005-01-10 cbbrowne tools/altperl/subscribe_set.pl
-Steve Simms changes - subscribe_set.pl - add usage printout, allow node to be
-called 123 as well as node123
-
-=================================
-
-2005-01-10 cbbrowne tools/altperl/slon_kill.pl
-Add usage output
-
-Potentially use environment to determine where cluster information is
-
-Turn reused logic into a function
-
-=================================
-
-2005-01-10 cbbrowne tools/altperl/README,tools/altperl/slon.env
-Have a sequence parameter, $SEQUENCE_ID, to manage sequence IDs just like $TABLE_ID does for tables
-
-=================================
-
-2005-01-10 darcyb doc/adminguide/filelist.sgml,doc/adminguide/slonconf.sgml
-document slon.conf configuration
-
-=================================
-
-2005-01-10 cbbrowne tools/altperl/create_set.pl
-Use $SEQUENCE_ID rather than $SEQID, which will become an environment parameter.
-
-Change suggested by Steve Simms
-
-=================================
-
-2005-01-10 cbbrowne tools/altperl/merge_sets.pl
-Steve Simms changes - have usage, common config parameter, allow nodes
-to be called 123 as well as node123
-
-=================================
-
-2005-01-10 cbbrowne doc/adminguide/slon.sgml,src/slon/confoptions.h,src/slon/remote_worker.c,src/slon/slon.c
-Added a dynamic SYNC group "windowing" scheme, along with docs and
-configuration option code.
-
-This allows defining a target "desired_sync_time", defaulting to 1
-minute, where, if replication is behind, slon will gradually increase
-sync group sizes to try to get the expected time for the group to
-take that period of time.
-
-It backs off IMMEDIATELY, if there is a large or long running SYNC,
-and starts at 1, and increases group sizes by the greater of 1 and
-10% of the last group size. Once the node gets up to date, that
-also causes it to back off to sync sizes of 1 or 2.
-
-This makes it reasonable to have the maximum sync grouping set rather
-high, as the groups will only get large gradually, in keeping with
-how the system is performing.
-
-=================================
-
-2005-01-11 darcyb doc/adminguide/slonconf.sgml,share/slon.conf-sample
-Document cbb's newly added desired_sync_time config option.
-
-=================================
-
-2005-01-12 cbbrowne doc/adminguide/faq.sgml
-Add in discussion of the "long running idle transaction" problem.
-
-=================================
-
-2005-01-12 darcyb src/slon/cleanup_thread.c
-fix copy/paste typo for deleteing from sl_log_* tables.
-
-=================================
-
-2005-01-12 cbbrowne doc/adminguide/reshape.sgml
-Cleaned up SGML tagging a bit
-
-=================================
-
-2005-01-12 darcyb src/backend/slony1_funcs.c,src/slon/cleanup_thread.c,src/slon/conf-file.h,src/slon/confoptions.c,src/slon/confoptions.h,src/slon/dbutils.c,src/slon/local_listen.c,src/slon/misc.c,src/slon/misc.h,src/slon/remote_listen.c,src/slon/remote_worker.c,src/slon/runtime_config.c,src/slon/scheduler.c,src/slon/slon.c,src/slon/slon.h,src/slon/sync_thread.c,src/slonik/dbutil.c,src/slonik/slonik.c,src/slonik/slonik.h,src/xxid/xxid.c
-pgindent run
-
-=================================
-
-2005-01-17 cbbrowne tools/altperl/slon_kill.pl
-Mods per Steve Simms...
-
- I also moved the "require $SLON_ENV_FILE" to a point *after*
- the usage statement, so that it doesn't croak if slon.env isn't
- present.
-
-=================================
-
-2005-01-18 cbbrowne doc/adminguide/faq.sgml,doc/adminguide/monitoring.sgml,tools/test_slony_state.pl
-Added in a script to test the state of a Slony-I cluster, along with
-some documentation
-
-=================================
-
-2005-01-18 cbbrowne doc/adminguide/faq.sgml
-Added docs for a condition which breaks replication triggers
-
-=================================
-
-2005-01-18 cbbrowne doc/adminguide/ddlchanges.sgml,doc/adminguide/slonik_ref.sgml
-Added some "best practices" material concerning how to better cope
-with DDL changes.
-
-This also pointed to documenting more precisely what the Slonik
-"execute script" command does.
-
-=================================
-
-2005-01-19 darcyb share/DBITECH-SLONY-I-MIB.txt
-Beginnings of snmp status and management interface for Slony
-
-=================================
-
-2005-01-21 darcyb share/DBITECH-SLONY-I-MIB.txt
-Fix 2 typo's as pointed out by mastermind.
-
-=================================
-
-2005-01-23 cbbrowne doc/adminguide/faq.sgml,doc/adminguide/intro.sgml,doc/adminguide/listenpaths.sgml
-Added FAQ entry, revised intro (textual revisions), fixed formatting of
-listenpaths.sgml a bit
-
-=================================
-
-2005-01-24 cbbrowne doc/adminguide/README,doc/adminguide/addthings.html,doc/adminguide/altperl.html,doc/adminguide/app-slon.html,doc/adminguide/app-slonik.html,doc/adminguide/cluster.html,doc/adminguide/concepts.html,doc/adminguide/ddlchanges.html,doc/adminguide/definingsets.html,doc/adminguide/dropthings.html,doc/adminguide/failover.html,doc/adminguide/faq.html,doc/adminguide/firstdb.html,doc/adminguide/help.html,doc/adminguide/installation.html,doc/adminguide/listenpaths.html,doc/adminguide/maintenance.html,doc/adminguide/monitoring.html,doc/adminguide/requirements.html,doc/adminguide/reshape.html,doc/adminguide/slonconfig.html,doc/adminguide/slonik.html,doc/adminguide/slonstart.html,doc/adminguide/slony-commands.html,doc/adminguide/slony.html,doc/adminguide/slonyadmin.html,doc/adminguide/slonyintro.html,doc/adminguide/subscribenodes.html,doc/adminguide/t24.html,doc/adminguide/x267.html,doc/adminguide/x931.html
-Apply changes from CVS HEAD admin guide into the stable branch as this
-material will be useful for both versions
-
-=================================
-
-2005-01-24 cbbrowne doc/adminguide/addthings.sgml,doc/adminguide/adminscripts.sgml,doc/adminguide/concepts.sgml,doc/adminguide/faq.sgml,doc/adminguide/help.sgml,doc/adminguide/intro.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/prerequisites.sgml,doc/adminguide/reference.sgml,doc/adminguide/slonik_ref.sgml,doc/adminguide/slony.sgml
-Plenty of modifications to documentation; lots of textual changes.
-
-=================================
-
-2005-01-25 cbbrowne tools/altperl/slon_start.pl,tools/altperl/slon_watchdog.pl
-slon_watchdog.pl.diff
-- Added --config and --help options, as with other files
-- Use a while loop instead of a recursive function for the watchdog process
-- Allow node# to be given as just a number, as with other files
-
-slon_start.pl.diff
-- --help would fail if --config wasn't specified and slon.env wasn't in @INC
-- Call slon_watchdog.pl using --config
-
---
-Steve Simms
-
-=================================
-
-2005-01-26 darcyb src/slon/Makefile
-Check for FLEX and bail if not present
-
-=================================
-
-2005-01-26 darcyb Makefile.global.in,aclocal.m4,configure.ac,config/perl.m4
-Clean up detection of lex/yacc as well as check for perl's location
-
-=================================
-
-2005-01-26 darcyb configure
-Bring sed detection forward
-
-=================================
-
-2005-01-26 darcyb Makefile.global.in,configure.ac
-Add proper detection of sed since slonik relies on haveing sed available
-
-=================================
-
-2005-01-26 darcyb configure
-Bring the previous configure.ac commit into the frontend
-
-=================================
-
-2005-01-26 darcyb src/slonik/Makefile,src/slonik/slonik.c
-Use the detected version of sed
-
-=================================
-
-2005-01-26 darcyb tools/altperl/Makefile,tools/altperl/build_env.pl,tools/altperl/create_set.pl,tools/altperl/drop_node.pl,tools/altperl/drop_set.pl,tools/altperl/failover.pl,tools/altperl/init_cluster.pl,tools/altperl/merge_sets.pl,tools/altperl/move_set.pl,tools/altperl/regenerate-listens.pl,tools/altperl/restart_node.pl,tools/altperl/restart_nodes.pl,tools/altperl/show_configuration.pl,tools/altperl/show_nodes.pl,tools/altperl/slon-tools.pm,tools/altperl/slon.env,tools/altperl/slon_kill.pl,tools/altperl/slon_pushsql.pl,tools/altperl/slon_start.pl,tools/altperl/slon_watchdog.pl,tools/altperl/slon_watchdog2.pl,tools/altperl/subscribe_set.pl,tools/altperl/uninstall_nodes.pl,tools/altperl/unsubscribe_set.pl,tools/altperl/update_nodes.pl
-Remove non required hash-bangs, and setup hash-bang substitution, provide method to remove .pl from scripts
-
-=================================
-
-2005-01-27 cbbrowne src/ducttape/test_1_pgbench_no_node1
-Test where the nodes are numbered 11 and 22 rather than 1 and 2
-to validate that you don't need a node #1
-
-=================================
-
-2005-01-28 cbbrowne src/slon/remote_listen.c
-Reformatted function call contents to make indentation consistent
-
-=================================
-
-2005-01-28 cbbrowne src/slon/confoptions.h
-Allow -t timeout parameter to be as much as 10 minutes long
-
-=================================
-
-2005-01-28 cbbrowne doc/adminguide/slon.sgml
-Added comments about how SYNCs are not needed nearly as often on
-subscriber nodes
-
-=================================
-
-2005-01-28 cbbrowne src/slon/remote_worker.c
-A reference to last_sync_group_size was missed; added it back
-
-And some reindentation...
-
-=================================
-
-2005-02-01 darcyb configure,configure.ac
-Repair variable substitution problem with bison -y (remove trailing ,)
-
-=================================
-
-2005-02-02 cbbrowne doc/adminguide/failover.sgml,doc/adminguide/faq.sgml,doc/adminguide/slonik_ref.sgml
-Improved discussion of FAILOVER and why it is vital that it abandon the
-failed node.
-
-=================================
-
-2005-02-02 cbbrowne tools/altperl/README,tools/altperl/create_set.pl,tools/altperl/regenerate-listens.pl,tools/altperl/restart_nodes.pl,tools/altperl/show_configuration.pl,tools/altperl/slon-tools.pm,tools/altperl/slon.env,tools/altperl/slon_kill.pl,tools/altperl/slon_start.pl,tools/altperl/slon_watchdog.pl,tools/altperl/slon_watchdog2.pl,tools/altperl/uninstall_nodes.pl
-Patches per Steve Simms to replace $SETNAME with $CLUSTER_NAME which
-is really a much more consistent name to use to identify Slony-I
-clusters...
-
-Also, a change by Chris Browne that, for non-users of Apache log rotator,
-puts the present timestamp in the name of the log file. That way there's
-a rotation of sorts even if it isn't managed by "ALR".
-
-=================================
-
-2005-02-02 cbbrowne doc/adminguide/adminscripts.sgml
-Alter documentation to reflect the renaming of "$SETNAME" to "$CLUSTER_NAME"
-in the admin tools
-
-=================================
-
-2005-02-02 cbbrowne doc/adminguide/slony.sgml,doc/adminguide/usingslonik.sgml
-Adding in a document to discuss "care and feeding" of embedding slonik
-scripts
-
-=================================
-
-2005-02-02 cbbrowne tools/altperl/slon.env
-Major additions to comments by Steve Simms
-
-=================================
-
-2005-02-02 cbbrowne doc/adminguide/addthings.sgml,doc/adminguide/adminscripts.sgml,doc/adminguide/ddlchanges.sgml,doc/adminguide/dropthings.sgml,doc/adminguide/failover.sgml,doc/adminguide/firstdb.sgml,doc/adminguide/help.sgml,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/reshape.sgml,doc/adminguide/slon.sgml,doc/adminguide/slonik.sgml,doc/adminguide/slony.sgml,doc/adminguide/startslons.sgml,doc/adminguide/subscribenodes.sgml
-Whole bunch of Slony-I sections ought to be treated as a single
-<ARTICLE> so that the table of contents is generated for the whole
-lot of them rather than one for each section
-
-=================================
-
-2005-02-02 darcyb TODO
-add request for upgrade docs, and more examples. remove cbb wik/fai now that it's intergrated
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/ddlchanges.sgml
-More commentary about pathologies
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/installation.sgml,doc/adminguide/intro.sgml
-Reshaped sectioning a bit to make things flow better
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/defineset.sgml
-Added some comments about how adding lots of sequences gets pathological
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/prerequisites.sgml
-Moved notes about PG 7.2 to new page on doing upgrades using Slony-I
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/dropthings.sgml,doc/adminguide/plainpaths.sgml,doc/adminguide/slon.sgml,doc/adminguide/slonik.sgml
-Added document on handling of plain paths...
-
-Fixed tagging errors and such in various files
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/slonik_ref.sgml
-Retagging the intro material
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/filelist.sgml
-Added new documents
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/slony.sgml
-Reshaped it so it's only a few parts and a few articles
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/versionupgrade.sgml
-New article on using Slony-I to do version upgrades of PostgreSQL
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/usingslonik.sgml
-Reshaped sections a bit to improve flow of web pages
-
-=================================
-
-2005-02-07 cbbrowne doc/adminguide/faq.sgml
-Evidently the "dup key" problem isn't SIG 11 and isn't (in an obvious way)
-a corrupted index...
-
-=================================
-
-2005-02-09 cbbrowne doc/adminguide/addthings.sgml,doc/adminguide/adminscripts.sgml,doc/adminguide/cluster.sgml,doc/adminguide/concepts.sgml,doc/adminguide/ddlchanges.sgml,doc/adminguide/defineset.sgml,doc/adminguide/dropthings.sgml,doc/adminguide/failover.sgml,doc/adminguide/faq.sgml,doc/adminguide/firstdb.sgml,doc/adminguide/help.sgml,doc/adminguide/installation.sgml,doc/adminguide/intro.sgml,doc/adminguide/legal.sgml,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/plainpaths.sgml,doc/adminguide/reshape.sgml,doc/adminguide/slon.sgml,doc/adminguide/slonik.sgml,doc/adminguide/slony.sgml,doc/adminguide/startslons.sgml,doc/adminguide/subscribenodes.sgml,doc/adminguide/usingslonik.sgml,doc/adminguide/versionupgrade.sgml
-Fix up tagging of documents; did a lot of SGML normalization.
-
-=================================
-
-2005-02-09 cbbrowne tools/altperl/regenerate-listens.pl
-Vivek Khera updated this to use DBI
-
-=================================
-
-2005-02-10 smsimms tools/altperl/show_nodes.pl
-This file was just a copy of init_cluster.pl, and had nothing to do
-with showing node information.
-
-=================================
-
-2005-02-10 smsimms Makefile.global.in,tools/altperl/Makefile
-Make sysconfdir and pglibdir available to sed
-
-These will be used to store the altperl configuration file and
-slon-tools.pm
-
-=================================
-
-2005-02-10 smsimms doc/adminguide/adminscripts.sgml,tools/altperl/README,tools/altperl/build_env.pl,tools/altperl/create_set.pl,tools/altperl/drop_node.pl,tools/altperl/drop_set.pl,tools/altperl/failover.pl,tools/altperl/init_cluster.pl,tools/altperl/merge_sets.pl,tools/altperl/move_set.pl,tools/altperl/restart_node.pl,tools/altperl/restart_nodes.pl,tools/altperl/show_configuration.pl,tools/altperl/slon.env,tools/altperl/slon_kill.pl,tools/altperl/slon_pushsql.pl,tools/altperl/slon_start.pl,tools/altperl/slon_tools.conf-sample,tools/altperl/slon_watchdog.pl,tools/altperl/slon_watchdog2.pl,tools/altperl/subscribe_set.pl,tools/altperl/uninstall_nodes.pl,tools/altperl/unsubscribe_set.pl,tools/altperl/update_nodes.pl
-Use fixed paths for altperl tools configuration and library files.
-
-The configuration file defaults to the "sysconfdir" argument to
-configure (/usr/local/etc by default), and has been renamed to
-slon_tools.conf, which seems to go along with the naming convention of
-the configuration files in /usr/local/pgsql/data.
-
-The slon-tools.pm library is installed in the pglibdir path.
-
-I've also updated the relevant documentation to note the slon.env name
-change.
-
-=================================
-
-2005-02-10 smsimms tools/altperl/Makefile,tools/altperl/slon_start.pl
-Added an "install" target to Makefile. It copies the configuration
-file, library, and slon start/stop/watch scripts to their relevant
-directories. I'm holding off on the slonik scripts until we decide
-where we want them to go.
-
-Adjusted DISTDIRS to reflect the slon.env -> slon_tools.conf change.
-
-Added a pgbindir substitution, and modified slon_start.pl so that it
-uses that path to get to slon_watchdog.
-
-=================================
-
-2005-02-10 smsimms tools/altperl/build_env.pl,tools/altperl/drop_node.pl,tools/altperl/drop_set.pl,tools/altperl/failover.pl,tools/altperl/init_cluster.pl,tools/altperl/merge_sets.pl,tools/altperl/move_set.pl,tools/altperl/restart_node.pl,tools/altperl/restart_nodes.pl,tools/altperl/show_configuration.pl,tools/altperl/show_nodes.pl,tools/altperl/slon_kill.pl,tools/altperl/slon_pushsql.pl,tools/altperl/slon_start.pl,tools/altperl/slon_watchdog.pl,tools/altperl/slon_watchdog2.pl,tools/altperl/subscribe_set.pl,tools/altperl/uninstall_nodes.pl,tools/altperl/unsubscribe_set.pl,tools/altperl/update_nodes.pl
-Removed Emacs hints from the #! line, which were preventing the
-scripts from running on RH Linux.
-
-=================================
-
-2005-02-11 cbbrowne doc/adminguide/faq.sgml,doc/adminguide/prerequisites.sgml
-Added documentation about how the slony user needs to not only be a
-PostgreSQL "superuser" but to also have system table update privileges.
-
-=================================
-
-2005-02-11 darcyb share/Makefile,src/backend/Makefile,src/xxid/Makefile
-Install .sql and .conf files as mode 644 not 755
-
-=================================
-
-2005-02-14 cbbrowne doc/adminguide/ddlchanges.sgml
-More comments...
-
-=================================
-
-2005-02-14 smsimms tools/altperl/Makefile
-Make "all" the default target.
-
-Install slon_start, slon_kill, etc. instead of slon_start.pl,
-slon_kill.pl, etc.
-
-=================================
-
-2005-02-14 smsimms tools/regenerate-listens.pl,tools/altperl/regenerate-listens.pl
-Moved regenerate-listens.pl from tools/altperl to tools.
-
-=================================
-
-2005-02-15 cbbrowne doc/adminguide/faq.sgml
-Added notes on a "missing OID" problem that can take place if you
-drop a cluster but have some connection pool system (common for
-Java apps) that keeps around connections that are pointing to
-obsolete stored plans.
-
-=================================
-
-2005-02-15 cbbrowne doc/adminguide/faq.sgml,doc/adminguide/slonik_ref.sgml
-Fix SGML tagging error, add link so that Slonik reference pages
-point to the FAQ entry on 'missing OIDs' problem
-
-=================================
-
-2005-02-16 darcyb src/backend/slony1_funcs.sql
-Fix cluster init, default log shipping to false, with cbb's blessing
-
-=================================
-
-2005-02-16 smsimms src/backend/slony1_funcs.sql
-Provide a less cryptic error message when you pass a non-existent
-tablename to determineIdxnameUnique or determineAttkindUnique.
-
-=================================
-
-2005-02-16 smsimms src/backend/slony1_funcs.sql
-Add a missing WHERE clause that causes MOVE SET to fail when:
-
-1. There are three or more nodes
-2. Sets originate on at least two nodes
-3. A set is being moved from a third node to one of the first two.
-
-=================================
-
-2005-02-17 cbbrowne src/ducttape/test_1_pgbench,src/ducttape/test_2_pgbench,src/ducttape/test_3_pgbench,src/ducttape/test_4_pgbench,src/ducttape/test_5_pgbench,src/ducttape/test_6_autolisten
-Fix some misspellings
-
-=================================
-
-2005-02-17 wieck src/slon/confoptions.h,src/slon/remote_worker.c,src/slon/slon.c,tools/slony1_dump.sh
-First cut on the log shipping mechanism.
-
-The tools/slony1_dump.sh script can be used against a subscriber
-to get a snapshot of a replica's user data plus minimal status
-information.
-
-If slon is started with -a <archivedir>, it will output an sql
-script for every sync processing, containing statements that replicate
-the changes plus keep the status information up to date. Note that these
-scripts will have the same "grouping" of SYNC events that the replica
-used.
-
-Next steps:
- Add output of archive files by slon for subscribing, unsubscribing
- and merging of sets and for ddl script executions.
-
-Jan
-
-=================================
-
-2005-02-17 cbbrowne doc/adminguide/slon.sgml,src/slon/remote_worker.c,src/slon/slon.c,src/slon/slon.h
-1. Added DocBook documentation for "-a" slon option that writes log shipping
- files
-
-2. Added docs for "-a" option to slon runtime
-
-3. Added SLON_MAX_PATH #define
-
-4. Macro for TERMINATE_QUERY_AND_ARCHIVE; (This one may be dubious.)
-
-=================================
-
-2005-02-18 cbbrowne doc/adminguide/plainpaths.sgml
-Docs on setting up STORE PATH entries versus ADMIN CONNINFO
-
-=================================
-
-2005-02-18 cbbrowne doc/adminguide/adminscripts.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/prerequisites.sgml,doc/adminguide/reshape.sgml
- - Add links into the table documentation...
-
- - Adding in info on path handling...
-
-=================================
-
-2005-02-18 darcyb Makefile.global.in,aclocal.m4,config.h.in,configure,configure.ac,config/acx_libpq.m4,config/acx_netsnmp.m4,config/acx_pthread.m4,config/acx_slonytools.m4,src/slon/Makefile,src/slon/confoptions.h,src/slon/misc.c,src/slon/misc.h,src/slon/slon.c,src/slon/slon.h,src/slon/snmp_thread.c
-Check in first round of minimal net-snmp sub-agentx support, net-snmp 5.1.x is the minimum supported version. At the moment all you can do via SNMP is get/set the log level. SNMP support is not enabled or compiled in by default. Run configure with --with-netsnmp to enable support.
-
-Also added support for --with-perltools=<dir>. This is where the altperl tools should be installed to, if <dir> is not supplied the default install target is $PREFIX/bin.
-TODO: configure needs to have proper detection of required perl modules (DBD:Pg)
-
-And finnaly, correct a compiler warning in confoptions.h
-
-=================================
-
-2005-02-18 cbbrowne doc/adminguide/faq.sgml
-Added an example of "Event Surgery" to the FAQ.
-
-=================================
-
-2005-02-18 cbbrowne doc/adminguide/addthings.sgml,doc/adminguide/adminscripts.sgml,doc/adminguide/concepts.sgml,doc/adminguide/ddlchanges.sgml,doc/adminguide/defineset.sgml,doc/adminguide/dropthings.sgml,doc/adminguide/failover.sgml,doc/adminguide/faq.sgml,doc/adminguide/firstdb.sgml,doc/adminguide/intro.sgml,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/plainpaths.sgml,doc/adminguide/prerequisites.sgml,doc/adminguide/reshape.sgml,doc/adminguide/schemadoc.xml,doc/adminguide/slon.sgml,doc/adminguide/slonik.sgml,doc/adminguide/slonik_ref.sgml,doc/adminguide/startslons.sgml,doc/adminguide/subscribenodes.sgml,doc/adminguide/usingslonik.sgml,doc/adminguide/versionupgrade.sgml
-Eliminated most <link> tags in favor of (much simpler!) <xrefs>
-
-Added a number of links into the schema docs
-
-=================================
-
-2005-02-18 darcyb src/slon/remote_worker.c
-replace missing ; to allow remote_worke.c to compile again.
-
-=================================
-
-2005-02-20 smsimms tools/altperl/create_set.pl,tools/altperl/slon-tools.pm,tools/altperl/slon_tools.conf-sample
-Added support for multiple sets in slon_tools.conf.
-
-Modified create_set.pl to accept a set ID or name (as given in
-slon_tools.conf). I put the (unfortunately-named) get_set function in
-slon-tools.pm so that it can be used by other set-manipulating
-scripts.
-
-Also added --config and --help flags to create_set.pl, as I've been
-doing with the other scripts.
-
-=================================
-
-2005-02-20 smsimms tools/altperl/Makefile,tools/altperl/slon_start.pl
-Make use of the --with-perltools configure option. If it's specified,
-install all of the Perl scripts to the specified location ($prefix/bin
-by default).
-
-=================================
-
-2005-02-21 cbbrowne doc/adminguide/filelist.sgml
-Fix typo in filelist.sgml - missing quote
-
-=================================
-
-2005-02-21 cbbrowne doc/adminguide/logshipping.sgml
-Add in preliminary document on log shipping
-
-=================================
-
-2005-02-21 cbbrowne doc/adminguide/faq.sgml
-Fix typo - spurious "<"
-
-=================================
-
-2005-02-21 cbbrowne doc/adminguide/filelist.sgml,doc/adminguide/slony.sgml
-Add references to log shipping doc in
-
-=================================
-
-2005-02-21 cbbrowne doc/adminguide/logshipping.sgml
-Added further notes as to what aspects of log shipping are limited at
-this point
-
-=================================
-
-2005-02-22 smsimms tools/altperl/Makefile,tools/altperl/slon_watchdog.pl
-Fixed the restart_node call in slon_watchdog.pl.
-
-Required adding a pgbindir subsitution to the Makefile, so that the
-restart_node command can be run instead of just printed.
-
-=================================
-
-2005-02-22 smsimms tools/test_slony_replication.pl
-Removed a site-specific "where" clause, pointed out by mastermind on IRC.
-
-=================================
-
-2005-02-22 smsimms tools/altperl/drop_node.pl,tools/altperl/failover.pl,tools/altperl/move_set.pl,tools/altperl/restart_node.pl,tools/altperl/restart_nodes.pl,tools/altperl/show_configuration.pl,tools/altperl/slon_pushsql.pl,tools/altperl/unsubscribe_set.pl,tools/altperl/update_nodes.pl
-Removed the "set#" argument from failover.pl since it doesn't use it.
-
-Added --config and --help options to nearly all of the remaining
-scripts that didn't have them.
-
-Combined restart_nodes.pl and restart_node.pl by adding an "--all"
-switch to restart_node.pl and allowing it to accept multiple
-nodes as arguments.
-
-Added a "does file exist" check to slon_pushsql.pl.
-
-Removed a few unused declarations and made some minor stylistic
-changes.
-
-=================================
-
-2005-02-22 smsimms doc/adminguide/adminscripts.sgml,tools/altperl/Makefile,tools/altperl/README,tools/altperl/show_configuration.pl,tools/altperl/slon-tools.pm,tools/altperl/slon_tools.conf-sample,tools/altperl/slon_watchdog2.pl
-Eliminated the need for $SLON_BIN_PATH by using @@PGBINDIR@@.
-
-=================================
-
-2005-02-22 xfade configure,config/acx_netsnmp.m4
-Check for real net-snmp headers instead of the wrapper headers.
-
-=================================
-
-2005-02-22 smsimms doc/adminguide/adminscripts.sgml,tools/altperl/execute_script.pl,tools/altperl/slon_pushsql.pl
-Rename slon_pushsql.pl to execute_script.pl. The other scripts are
-named after slonik commands, so this is more consistent.
-
-=================================
-
-2005-02-22 smsimms tools/altperl/create_set.pl,tools/altperl/drop_set.pl,tools/altperl/init_cluster.pl,tools/altperl/merge_sets.pl,tools/altperl/slon_kill.pl,tools/altperl/slon_start.pl,tools/altperl/slon_watchdog.pl,tools/altperl/subscribe_set.pl,tools/altperl/update_nodes.pl
-Remove ".pl" from usage statement in files that still have it.
-
-=================================
-
-2005-02-22 darcyb doc/adminguide/adminscripts.sgml,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/reshape.sgml,doc/adminguide/startslons.sgml
-Remove the .pl extentions on the admin scripts to reflect chnages as made previously
-
-=================================
-
-2005-02-23 cbbrowne doc/adminguide/defineset.sgml,doc/adminguide/dropthings.sgml,doc/adminguide/faq.sgml,doc/adminguide/intro.sgml,doc/adminguide/listenpaths.sgml,doc/adminguide/maintenance.sgml,doc/adminguide/monitoring.sgml,doc/adminguide/slonik_ref.sgml,doc/adminguide/usingslonik.sgml
-Changed all table references to be <XREF> references to the DB schema
-tables.
-
-=================================
-
-2005-02-23 smsimms tools/regenerate-listens.pl
-Removed the @@PERL@@ substitution, which only works in altperl.
-Instead, use the same line as slony_setup.pl.
-
-=================================
-
-2005-02-23 smsimms tools/altperl/create_set.pl,tools/altperl/drop_set.pl,tools/altperl/init_cluster.pl,tools/altperl/move_set.pl,tools/altperl/slon-tools.pm,tools/altperl/slon_tools.conf-sample,tools/altperl/subscribe_set.pl
-Added support for sets originating on different nodes. The default
-remains the $MASTERNODE, but you can now add an "origin" attribute in
-the configuration file to designate that the set originates on some
-other node.
-
-Removed the requirement that each node have a parent. This is now an
-optional attribute in the configuration file -- otherwise, it is
-assumed that the node can contact any other node that doesn't have a
-parent, plus any node where it is the parent.
-
-Modified init_cluster.pl so that it only writes "store path" commands
-for paths that exist.
-
-Fixed a couple of bugs in init_cluster.pl that were preventing it from
-choosing the most efficient listen path between a given pair of nodes.
-
-=================================
-
-2005-02-24 cbbrowne doc/support/tested-arch.txt
-Fixed typo, added more platforms
-
-=================================
-
-2005-02-24 cbbrowne doc/adminguide/usingslonik.sgml
-More on the protocol of using Slony-I functions
-
-=================================
-
-2005-02-24 cbbrowne doc/adminguide/slonik_ref.sgml
-Add references to the main stored functions used by each Slonik command
-
-=================================
-
-2005-02-25 cbbrowne src/slon/scheduler.c
-Fix typo in comment - NO semantic change
-
-=================================
-
-2005-02-25 cbbrowne src/slon/remote_worker.c
-Factored log shipping code that was integrated into the function sync_event()
-into separate functions so that they may be used for other events as well.
-
-Further functional changes:
-
- - archive header contains comment lines to indicate where the "header"
- ends and the 'body' of queries begins. That will be useful for splitting
- the logs apart so that you test-apply the header (to see if it's valid)
- before then applying the Whole Log. Blindly applying the Whole Thing
- is a bad idea because it introduces a boatload of parsing work for any
- log that is applied in inappropriate order.
-
- - more error checking has been introduced
-
- The "archive log" processing functions check return codes from
- fprintf() and such, and if they encounter errors, this will abort
- processing of the SYNC.
-
- There's still more to do in this regard; close_log_archive() does not
- yet check rcs...
-
-=================================
-
-2005-02-25 cbbrowne doc/adminguide/logshipping.sgml
-Added additional comments about usage of log shipping
-
-=================================
-
-2005-02-25 cbbrowne src/slon/remote_worker.c
-Add log shipping support to the DDL_SCRIPT event
-
-=================================
-
-2005-02-25 cbbrowne doc/adminguide/logshipping.sgml
-The DDL_SCRIPT event is supported, with the result that log shipping
-now _does_ cope with Slonik "execute script" requests.
-
-=================================
-
-2005-02-27 cbbrowne tools/check_slon.sh,tools/check_slony_cluster.sh
-Add in John Sidney-Woollett <johnsw@wardbrook.com>'s Nagios scripts
-for checking that Slony-I is running properly.
-
-=================================
-
-2005-02-27 cbbrowne tools/README.checks
-Docs for John Sidney-Woollett's Nagios scripts
-
-=================================
-
-2005-02-28 cbbrowne doc/adminguide/faq.sgml,doc/adminguide/help.sgml
-Have link to pgpool in FAQ
-
-Add link to Freshmeat entry about Slony-I
-
-=================================
-
-2005-03-01 cbbrowne doc/adminguide/slonik_ref.sgml
-Added in UPDATE FUNCTION; for some reason that hadn't made it into the
-SGML documentation.
-
-=================================
-
-2005-03-03 cbbrowne tools/check_slony_cluster.sh
-- Added in ability to query a remote host
-- Mention the need to set PGPORT
-- Needed to properly quote the cluster namespace
-- psql often doesn't live in /usr/local/pgsql/bin; assume it to be in PATH
-
-=================================
-
-2005-03-03 cbbrowne tools/check_slon.sh
-Portability changes:
-
-1. Use the appropriate ps command and options
-
- Script is aware of Linux, FreeBSD, Solaris, and AIX
-
-2. Fixed problem with line endings (that I probably introduced)
-
-=================================
-
-2005-03-07 cbbrowne src/backend/slony1_funcs.sql,src/ducttape/test_8_logship,src/slon/cleanup_thread.c,src/slon/remote_worker.c,src/slon/slon.h
-Major changes to log shipping, allowing it to support substantially
-all events (to the degree supportible). Notably, COPY_SET now
-copies the contents of tables in newly subscribed sets.
-
-Also includes a new event, ACCEPT_SET, which addresses a race condition
-where updates might be lost. If ACCEPT_SET is received before the
-MOVE_SET has been processed, then the slon will wait until it has
-received both.
-
-=================================
-
-2005-03-07 cbbrowne doc/adminguide/failover.sgml,doc/adminguide/help.sgml,doc/adminguide/slonik_ref.sgml,doc/adminguide/usingslonik.sgml,src/ducttape/test_7_defines,src/slonik/scan.l
-Added scanner support for include and define
-
-Flex scanner code as per Korry <korryd@hotmail.com>
-
-cbbrowne added a ducttape script to test this facility as well as
-documentation. Due to the addition of this facility, the documentation
-describing the use of M4 for similar purpose has been dropped.
-
-=================================
-
-2005-03-07 cbbrowne src/slon/confoptions.h
-There's a minor typo in src/slon/confoptions.h that confuses
-Syslog_ident and Syslog_facility - this patch should correct it.
-
- -- Korry
- korryd@hotmail.com
-
-=================================
-
-2005-03-08 darcyb doc/adminguide/slonconf.sgml,share/slon.conf-sample,src/slon/conf-file.l,src/slon/confoptions.h,src/slon/dbutils.c,src/slon/slon.h
-Add new conf option: sql_on_connection.
-Description:
- Execute the enclosed SQL on each node serviced by this slon daemon at
- connect time it is usefull for setting ogging levels, or to tune the planner/memory memory used by slon.
-
-=================================
-
-2005-03-10 smsimms tools/altperl/ToDo
-Removed the generate_listen_paths item and discussion, since it has
-been implemented.
-
-Added the following:
-
-- The scripts are currently not compatible with "use strict". They
- would probably become easier to follow if they were (particularly
- with regard to figuring out where variables are defined).
-
-- We probably don't need one script per slonik command. Which of
- these can be combined, preferably without having to implement pages
- of arcane command-line options.
-
-- slon_start, slon_kill, and possibly slon_watchdog should be made
- into a slon_ctl shell script, with an /etc/init.d-compatible
- wrapper.
-
-=================================
-
-2005-03-10 smsimms tools/altperl/slon_tools.conf-sample
-Removed a "my" keyword that limits the scope of Slony sets too much.
-
-=================================
-
-2005-03-10 smsimms tools/altperl/README
-Rewrote the README file to reflect changes since 1.0.5.
-
-=================================
-
-2005-03-10 smsimms doc/adminguide/adminscripts.sgml
-Document the existence of store_node.pl.
-
-=================================
-
-2005-03-10 cbbrowne doc/adminguide/monitoring.sgml,tools/test_slony_state.pl
-Modified monitoring script so that it looks for some particular
-problem values, and sends out email based on finding problems.
-
-=================================
-
-2005-03-10 cbbrowne src/slon/cleanup_thread.c,src/slon/local_listen.c,src/slon/runtime_config.c,src/slon/scheduler.c,src/slon/slon.c,src/slon/slon.h
-
-signal handling watchdog using forked processes - Frank Thompson
-
-
-Slony-I 1.1 Change Request:
-
-The problem at hand is related to signal handling differences
-in multithreaded programs between different operating
-systems. In the slon process, it is intended that only the
-"main" thread is dealing with signals and that it uses the
-regular thread communication like mutexes and condition
-variables to control all the other working threads.
-
-That mutex and condition var communication sometimes can lock
-up, which causes the entire slon daemon to freeze. This can in
-extreme cases even happen after one of the working threads
-sent the main thread a signal to restart the slon process.
-
-What I had in mind to fix this is to have the program to
-actually fork() very early on. The parent process will then be
-the only one dealing with signals, while the childs ignores
-all signals entirely. The parent and the master thread of the
-child (which is the current slon) will communicate over a pipe
-or a socketpair. This way, the parent could detect that the
-slon stopped responding altogether and can issue a signal 9 to
-cleanup the situation.
-
-In other words, building a watchdog process right into the
-slon executable.
-
-
-Summary of Changes:
-
- slon main() will now fork() at the start and allow the parent
- process to handle cleanup, signal and termination of the child
- process. The child process is the scheduler which will talk
- to the parent (watchdog) process and vice versa via two sets
- of socket pairs. When shutting down the child process in the
- case of restart or termination, non blocking reads and writes
- are used to avoid lockups. Failure to shutdown the scheduler
- process nicely, the parent will SIGKILL it to ensure timely
- operation within the signal handler.
-
-
-
- globals:
-
- slon.c
- ------
- int watchdog_pipe[2]; // socket pair to talk with child process
- int sched_wakeuppipe[2]; // socket pair to talk with scheduler and parent process
-
- runtime_config.c
- ----------------
- pid_t slon_pid; // current pid
- pid_t slon_ppid; // parent pid
- pid_t slon_cpid; // child pid
-
- macros:
-
- slon_abort() and slon_restart() will now observe which process
- in the tree they will act upon, parent or child
-
- #define slon_abort()
- do {
- kill((slon_ppid == 0 ? slon_pid : slon_ppid), SIGTERM);
- pthread_exit(NULL);
- } while (0)
- #define slon_restart()
- do {
- kill((slon_ppid == 0 ? slon_pid : slon_ppid), SIGHUP);
- } while (0)
-
- functions:
-
- slon.c
- ------
- static void sighandler(int signo); // new slon parent process signal handler
- static void main_sigalrmhandler(int signo); // new scheduler alarm signal handler
- static void slon_kill_child(void); // new pipe notify based child termination function
-
-=================================
-
-2005-03-10 smsimms tools/altperl/store_node.pl
-New script to add a node to an existing cluster.
-
-Based on init_cluster.pl, minus the "INIT CLUSTER" command, and only
-adding paths and listens for the relevant node.
-
-=================================
-
-2005-03-11 cbbrowne Win32/Makefile.backend,Win32/Makefile.xxid,Win32/README,Win32/README.compiling
-Add in some preliminary Win32 support; makefiles that may be helpful
-for compiling xxid and backend functions.
-
-=================================
-
-2005-03-11 cbbrowne tools/altperl/slon-tools.pm
-Bug #1152
-
-Description:
-
- The query_slony_status function doesn't work with uppercase
- setnames (the watchdog2 script uses that function).
- workaround is to use \\"_$SETNAME\\" instead of _$SETNAME in the
- script, and to use my $result=`$SLON_BIN_PATH/psql -p $port -h
- $host -U slony --tuples-only $dbname --command="$query"`;
- as the query command (the username was missing there).
-
-=================================
-
-2005-03-11 cbbrowne tools/altperl/slon-tools.pm
-Per Bug #1152, add -U $dbuser parameter to database query
-
-=================================
-
-2005-03-11 smsimms tools/altperl/uninstall_nodes.pl
-Added --config and --help to uninstall_nodes.pl (last script).
-
-According to the documentation for UNINSTALL NODE, it already handles
-the various commands that were subsequently being sent to psql, so
-I've removed them from this script.
-
-Instead of just running UNINSTALL NODE on $MASTERNODE, run it on all
-nodes, doing $MASTERNODE last.
-
-=================================
-
-2005-03-14 cbbrowne src/slon/cleanup_thread.c
-Changes to address problems found when running multiple Slony-I
-clusters against a single backend...
-
-The problem is that if two slons are invoked at almost exactly the same
-time, then the cleanup threads will be pretty nearly in phase with one
-another. Which gives a (regrettably) excellent chance that both will try
-doing an ANALYZE of pg_catalog.pg_listeners concurrently. They'll both
-try to commit statistics for it, and one slon will therefore fail.
-
-1. At startup time, a random "bias" is calculated, and the slon
- sleeps up to an extra 100000ms (e.g. - 100s) between iterations
-
-2. A further "fuzz" of up to 100s is added
-
-3. The 7 tables are vacuumed in 7 separate queries
-
-4. If any of the vacuums fails, this is treated as a SLON_ERROR, not
- as a SLON_FATAL problem requiring that the slon fall over.
-
-=================================
-
-2005-03-15 cbbrowne src/ducttape/test_1_pgbench,src/ducttape/test_1_pgbench_no_node1,src/ducttape/test_2_pgbench,src/ducttape/test_3_pgbench,src/ducttape/test_4_pgbench,src/ducttape/test_5_pgbench,src/ducttape/test_7_defines
-Fix a bunch of misspellings
-
-=================================
-
-2005-03-15 cbbrowne tools/test_slony_state.pl
-Need to properly quote cluster name, as reported by Thomas Pundt...
-
-=================================
-
-2005-03-15 cbbrowne doc/adminguide/slon.sgml,doc/adminguide/slonik.sgml,doc/adminguide/slonik_ref.sgml,doc/adminguide/slony.sgml
-Added link to slonconf.sgml, and make sure that new documentation
-is included
-
-=================================
-
-2005-03-15 cbbrowne tools/test_slony_state-dbi.pl
-Add a DBI-based state tester
-
-=================================
-
-2005-03-15 cbbrowne doc/adminguide/plainpaths.sgml
-Discussion of added diagram
-
-=================================
-
-2005-03-15 cbbrowne doc/adminguide/complexenv.dia,doc/adminguide/complexenv.png
-Added a network diagram for discussion purposes
-
-=================================
-
-2005-03-15 cbbrowne tools/test_slony_replication.pl
-Cluster names need to be quoted in case they are in caps.
-
-=================================
-
-2005-03-15 cbbrowne src/ducttape/test_1_pgbench,src/ducttape/test_1_pgbench_no_node1,src/ducttape/test_2_pgbench,src/ducttape/test_3_pgbench,src/ducttape/test_4_pgbench,src/ducttape/test_5_pgbench,src/ducttape/test_6_autolisten,src/ducttape/test_7_defines,src/ducttape/test_8_logship
-Fix widespread problem with checking Make version; needed to
-quote $CGNU because it typically contains a multiword result.
-
-=================================
-
-2005-03-16 cbbrowne src/slon/remote_worker.c
-Change the SUBSCRIBE_SET event so that it starts by checking for
-the availability of tables on the subscriber node, and subscribes
-sequences _BEFORE_ copying all the data.
-
-That way we find problems before doing 8h of copying of data...
-
-As suggested by Hannu Krosing
-
-=================================
-
-2005-03-16 smsimms tools/altperl/slon_watchdog.pl
-Vary the sleep_seconds by up to 50% in either direction. This will
-help prevent watchdog processes from all firing at the same time.
-
-=================================
-
-2005-03-16 cbbrowne debian/changelog,debian/compat,debian/control,debian/copyright,debian/dirs,debian/docs,debian/files,debian/rules,debian/slony1.substvars
-Add Debian packaging control files, contributed by Tim Goodaire
-<tgoodair@ca.afilias.info>
-
-=================================
-
-2005-03-16 smsimms tools/altperl/execute_script.pl
-Added a "-c" to execute_script.pl, a la psql. If you only want to run
-a small number of commands, this saves you the trouble of putting them
-into a file first.
-
-Removed the "node#" argument since this is derivable. Replaced it
-with a --node option so that it can be overridden if necessary.
-
-Added an error check to make sure the set exists in the configuration
-file.
-
-=================================
-
-2005-03-16 smsimms tools/altperl/slon_kill.pl
-Add an option to only kill watchdogs, not slons.
-
-Some mild reformatting as well.
-
-=================================
-
-2005-03-17 darcyb aclocal.m4,config.h.in,configure,configure.ac,config/libc.m4,src/slon/slon.c
-Update sigaction flags to conform to POSIX standard. Add configure test to ensure we have SA_NODEFER as a sigaction flag.
-
-=================================
-
-2005-03-17 cbbrowne src/slon/cleanup_thread.c
-cleanup thread uses Slony-I stored procedure getMinXid() instead of
-trying to draw it out of pg_locks, eliminating the need to compare
-values.
-
-=================================
-
-2005-03-18 xfade src/slon/misc.h,src/slon/snmp_thread.c
-Change slon/misc.h and slon/snmp_thread.c to include c.h in the same manner as slon.c does. This fixes compiling when the includedir is not the parent dir of includedir-server.
-
-=================================
-
-2005-03-18 smsimms tools/altperl/slon-tools.pm
-Backwards-compatibility fix: allow set# to be passed as setd+ in
-addition to d+.
-
-I accidentally broke this while adding setname support.
-
-=================================
-
-2005-03-21 cbbrowne src/ducttape/test_1_pgbench,src/ducttape/test_2_pgbench,src/ducttape/test_3_pgbench,src/ducttape/test_4_pgbench,src/ducttape/test_5_pgbench,src/ducttape/test_6_autolisten,src/ducttape/test_7_defines,src/ducttape/test_8_logship
-Fixed problem with evaluation of whether to use "make" or "gmake";
-running this on AIX showed off that the output of "which gmake"
-can be an enormous string as opposed to the shell returning
-bad return codes...
-
-=================================
-
-2005-03-22 smsimms tools/check_slony_cluster.sh
-Patch from Vivek Khera:
-
-This patch de-bash-ifies the script, so it runs on /bin/sh under
-freebsd. it still runs under bash, of course...
-
-=================================
-
-2005-03-23 darcyb src/slon/scheduler.c,src/slon/slon.c
-From Andreas Pflug <pgadmin@pse-consulting.de>:
-
-In schedule.c and slon.c, pthread_self() result is compared with a
-pthread_t variable, which isn't the recommended way to check for
-equality; instead pthread_equal should be used. Under win32 this fails,
-because pthread_t isn't a simple value. The attached file provides a
-patch for this, and should make this portable for all pthread_t platforms.
-
-=================================
-
-2005-03-23 cbbrowne doc/adminguide/Makefile,doc/adminguide/README,doc/adminguide/logshipping.sgml,doc/adminguide/slon.sgml
-Fixed makefile to build HTML output if you just type 'make'
-
-Updates to log shipping documentation
-
-Fixes to slon documentation, including adding in the names of internal
-variables that are controlled by the slon command line parameters
-
-=================================
-
-2005-03-23 darcyb Makefile.global.in,configure,configure.ac,config/docs.m4,config/libc.m4,doc/Makefile,doc/adminguide/Makefile,doc/adminguide/bookindex.sgml,doc/concept/Makefile,doc/howto/Makefile,doc/implementation/Makefile,makefiles/Makefile.win,src/slon/slon.c
-Whole raft of changes.
-A) use signal() on win32 since there is no sigaction under that platform
-B) have make install now install documentation if --with-docdir=<dir> is defined, This will have to be updated to have docs installed by default.
-
-=================================
-
-2005-03-25 xfade tools/altperl/Makefile
-Fix make clean. Added -f to the rm statements. This prevents an error from being raised if a file is not there.
-
-=================================
-
-2005-03-25 xfade src/slon/slon.c
-Fix cywin macro.
-
-=================================
-
-2005-03-25 xfade config/acx_pthread.m4,makefiles/Makefile.win,src/slon/Makefile
-Fix cygwin build. Added a cygwin case to the phread macro. Added the CPPFLAGS to the Makefile.win. Override the CFLAGS in slon/Makefile to ensure that config.h can be found.
-
-=================================
-
-2005-03-29 cbbrowne src/slon/confoptions.h
-Two changes to options:
-
-1. Maximum SYNC grouping changed to 10000
-
-Rod Taylor reports a need for Big Grouping for cases where replication
-falls WAY behind after copying Very Large replication sets. Query plans
-can 'head pathological' such that things revert to Seq Scans, and if
-you're doing a huge Seq Scan, you might as well process a bunch of groups
-in view of the up-front cost of the Seq Scan
-
-2. Maximum desired_sync_time increased to 6000000
-
-To support the above, potentially...
-
-=================================
-
-2005-03-29 cbbrowne src/slon/remote_worker.c
-If desired sync time is zero, then eliminate evaluation of the
-"desired sync time" logic.
-
-=================================
-
-2005-03-29 cbbrowne src/slon/cleanup_thread.c
-Changes to cleanup thread
-
-1. Vacuum pg_statistic
-
-2. Change calculation of random biases (e.g. - vac_bias and the
- per-iteration random value) to be proportional to SLON_CLEANUP_SLEEP.
- That way, if one modifies SLON_CLEANUP_SLEEP, the random adjustments
- will neither dominate nor disappear.
-
-3. Change log message to describe the _real_ error - being unable to
- process the getMinXid() query. (It was referring to the old
- approach where it was looking at pg_locks.)
-
-=================================
-
-2005-03-30 cbbrowne doc/adminguide/help.sgml
-Add a link to a Russian HOWTO document for Slony-I.
-
-=================================
-
-2005-03-30 xfade src/backend/slony1_funcs.c
-First step of implementing slon_quote_ident. This adds code taken from PostgreSQL -HEAD. Our function now quotes all identifiers known by your version of PostgreSQL.
-
-=================================
-
-2005-04-02 xfade config/libc.m4
-Add test to keep mingw from halting with an error.
-
-=================================
-
-2005-04-06 darcyb configure,configure.ac
-Mark snmp support as experimental, which it is currently.
-
-=================================
-
-2005-04-06 darcyb src/backend/slony1_funcs.v74.sql
-Since as of 7.4 truncate is transaction safe, lets use it in an effort to help performance along during a aborted subscribe.
-
-=================================
-
-2005-04-11 cbbrowne src/ducttape/test_9_fileconf
-Add a test where configuration for slons is passed in via configuration
-files rather than as command line parameters
-
-=================================
-
-2005-04-11 cbbrowne src/ducttape/test_1_pgbench
-Make options consistent with other scripts
-
-=================================
-
-2005-04-11 cbbrowne src/slon/confoptions.h
-Fix typos
-
-=================================
-
-2005-04-11 cbbrowne doc/adminguide/logshipping.sgml,doc/adminguide/slon.sgml,doc/adminguide/slonconf.sgml
-More docs for log shipping and on the slon options
-
-=================================
-
-2005-04-11 xfade src/backend/slony1_funcs.sql
-This patch adds two new functions:
-
-- slon_quote_brute is used in internal functions to add quotes around
-identifiers. It replaces all calls to quote_ident in all our functions. This
-way we quote every identifier, instead of just the reserved ones.
-
-Pro: we catch every problem with names in Caps and reserved words.
-Con: This will increase the size of a row in sl_log_1, as everything is
-quoted.
-
-- slon_quote_input is used in internal functions to make sure that user input
-is quoted properly.
-
-Known issues:
-Indexes with problematic names are not supported yet!
-
-
-This patch touches a lot of functions, so please test this while we are still
-in beta!
-
-=================================
-
projects / slony1-engine.git / commitdiff